Wastewater collection system for pharmaceutical production lines.
 The wastewater collection units enable the centralized collection of relevant liquid by-products and residual streams from pharmaceutical production. Typical media (depending on the process) are fed into the collection system, buffered there, and mixed as needed – before being directed for treatment or disposal.


 Application
 System for the controlled collection of rinsing and wastewater from one or more systems in pharmaceutical plants. Suitable for:
 
 
 Production lines with frequent cleaning (CIP)
 
 
 Cleaning, disinfection and cleaning rinsing wastewater
 
 
 Process and laboratory wastewater with varying composition

 The system creates a controlled interface for subsequent treatment or external disposal and supports compliance with drainage and environmental regulations .


 Which currents are typically recorded
 In a classic interpretation, the following media, among others, are directed into the collection system:
 
 
 Cleaning rinse cycles
 
 
 Discharges of concentrates from PW water production
 
 
 other process waters (depending on the line)



 Why modular?
 Modular units allow capacity to be reliably tailored to specific production requirements. This ensures the system remains scalable – for example, in the event of changes to lines, cleaning frequencies, or wastewater volumes.


 Monitoring & Automation (optional / project-specific)
 Optionally integrated sensors support automated control and integration into the higher-level automation system , e.g.:
 
 
 pH measurement
 
 
 Conductivity measurement (LF)
 
 
 Level monitoring



 Special features / characteristics
 
 
 Hygienically executed construction in AISI 304 / 316L
 
 
 Alternative version with plastic piping and PP container possible.
 
 
 Separation of specific wastewater streams with subsequent controlled merging is possible.
 
 
 Entry systems for neutralization are possible
 
 
 Modular skid design for flexible expansion or adaptation
 
 
 Integrated sensors for real-time monitoring of fill level and pH
 
 
 Fully automatable with Siemens/Rockwell PLC and remote maintenance access
 
 
 Electropolished surface, Ra ≤ 0.8 µm
 
 
 Optional explosion-proof version as well as leakage and alarm function



 Advantage
 Efficient, GMP-compliant collection and buffering of wastewater from pharmaceutical processes – with integrated monitoring and automation.


 Technical data
 Capacity: 1 – 160 m³/h (modularly scalable)
 Material: AISI 316L (material 1.4404) or plastic
 Tank design: Pressure tanks or unpressurized collection shafts
 Temperature range: 5 – 60 °C
 Surface roughness: Ra ≤ 0.8 µm
 Buffer volume: e.g. 500 – 15,000 l per unit
 Options: automatic level and leak detection, pH/conductivity monitoring, explosion-proof design, remote maintenance


 contact
 For project-specific design and integration into your infrastructure, please use the contact form below.


 Modular design & extensions
 CIP – Cleaning in Place
 CIP system pharmaceuticals
 Dosing system – volumetric or gravimetric
 Loop return – monitoring/control unit
 Loop distribution station – media distribution
 Valve Block – Valve blocks