View readings and operate your sensors from an easily accessible location
 
The remote display is a separate display and operating unit for sensors in the RHOTEC, SONATEC, OXYTRANS, CARBOTEC NIR and COMBITEC series. It allows operation even under difficult installation conditions or where space at the measuring point is limited. The display replaces the standard electronics enclosure, connects to the sensor via the special cable supplied and is mounted at the desired operating location using its integrated wall bracket. Standard cable lengths: 5, 10 or 20 m; other lengths on request.
 
Why Remote?
 
The sensor remains at the measuring point while the display is mounted at a more accessible location. This allows the sensor to be operated even under unfavourable installation conditions. If insufficient space is available at the measuring point, the remote display provides an alternative solution.
 
Compatible Series
 
 
 
RHOTEC
 
 
SONATEC
 
 
OXYTRANS
 
 
CARBOTEC NIR
 
 
COMBITEC
 
 
Other cable lengths: non-standard lengths can be requested for specific projects.
 
Configuration and Mounting
 
Configuration: Remote display instead of the standard electronics enclosure
 
Compatible Sensor Series: RHOTEC, SONATEC, OXYTRANS, CARBOTEC NIR, COMBITEC
 
Connection: Special connection cable supplied with the system
 
Standard Cable Lengths: 5 m / 10 m / 20 m
 
Additional Cable Lengths: On Request
 
Display Mounting: Integrated wall bracket at the intended operating location
 
Typical Installation Situation: Unfavourable installation conditions or insufficient space at the measuring point
 
Mounting principle: 1 Install the sensor at the designated measuring point. 2 Connect the display using the connection cable supplied. 3 Mount the display at the operating location using the integrated wall bracket.
 
Sensor series: RHOTEC, SONATEC, OXYTRANS, CARBOTEC NIR or COMBITEC.
 
Cable length: 5, 10 or 20 m; other lengths on request.
 
Operating location: wall mounting at a suitable, easily accessible position.