MultiMixer

Application

The MultiMixer is used for the continuous mixing of several streams of liquid products, e. g. water, acid and caustic. Since the number of blending channels can be adapted to individual needs, the skid provides a high degree of flexibility for the production of different products (brands).

Description

In multi component mixing different liquid or powder products are blended. The components to be mixed can be supplied from large storage tanks via supply lines or from vessels located on the skid. Mass flows and concentrations are permanently measured in the process and adjusted by ratio controllers. Therefore, the system is equipped with high precision flow meters and in-line sensors made by Centec. Centec have decades of experience in the development and manufacturing of own precision instruments. Frequently, the MultiMixer is also used for carbonation. In this case the skid contains a specifically designed Vortex-Venturi injector that feeds carbon dioxide in a very large number of very fine bubbles directly into the product stream. With the Centec mixing technology low-oxygen dosing of concentrates is possible. Based on the in-line measurements, the product steams and the carbon dioxide flow are instantly and fully automatically monitored and adjusted. Thus, repeatable results and minimum product losses are guaranteed. The modular design of the process unit allows for easy expansion, e. g. for mixing with deaerated water or for pasteurization of the finished product.

  • High precision in-line sensor technology for process control
  • Excellent accuracy and minimum product losses
  • Customized modular design with a standard PLC
  • Skid mounted for easy installation and start-up
  • Hygienic execution and full CIP/SIP capability
  • According to applicable guidelines (e. g. cGMP, FDA, GAMP, ISPE)
  • Completely qualified (DQ, IQ, OQ) if desired

Typical Technical Data

Capacity 1 - 150 m3/h
Material according to requirements (1.4301/AISI 304, 1.4404/AISI 316L, …)
Options different automation levels; remote maintenance access; in-line measurement of e. g. alcohol, Brix, O2, CO2; water deaeration; carbonation/nitrogenation; pasteurization; buffer tank; cooling

Contact

Tel.: +49 6181 18 78 0
Fax: +49 6181 18 78 50
 info(at)centec.de

Downloads

MultiMixer - Datasheet / Datenblatt
(0,49 MB, PDF, EN/DE)